- How to create bootable external hard drive for imac 2009 how to#
- How to create bootable external hard drive for imac 2009 Patch#
- How to create bootable external hard drive for imac 2009 mac#
Do this very slowly and carefully, as there is a cable you’ll need to disconnect! This will loosen the bezel and you can begin to work your way down until the whole bezel lifts up. Place your thumb on the edge of the display and your fingers on the back side of the iMac. From there, push your thumb down as your pull up your fingers. The best way to do this is by starting in the upper corners. Be aware that the four screws along the bottom are longer than the rest, so make sure you put all of them back in the correct locations.Īfter you remove these screws, it’s time to remove the whole front bezel. Next, there are twelve T8 Torx screws around the edge of the display that need removed.
If you’re worried about scratching it, place it on a soft surface away from the work area. The glass is simply held on by magnets, so all you have to do is lift straight up and the glass panel will come right off. Next, take your suction cups and place them in opposite corners of the screen. The screw won’t come all the way out, so just loosen it all the way and then pull the plate out. On the bottom edge of the iMac, take your Phillips screwdriver and remove the lone screw, which will allow the memory access plate to come off. Unplug everything from your iMac and lay the machine down on a flat surface with the screen pointing up. This page will help you find out what you need. For this how-to, I’m working on a 2008 iMac, and the specific tools listed above are the ones needed for this particular model, but it’s possible that yours might have different sizes of Torx screws. That way, you’ll have all the bits you need no matter what. Tweezers (Useful for when you accidentally drop screws in tight areas)ĭepending on what year your iMac is from, you might need different sizes of Torx screwdrivers, which is why it’s probably a good idea just to get a small set of specialty precision bits.A 3.5″ to 2.5″ hard drive adapter (there are ton to choose from, but here’s a cheap one that will work fine).
How to create bootable external hard drive for imac 2009 Patch#
How to create bootable external hard drive for imac 2009 mac#
Step 4: Double-click or press the Return key to boot your Mac from the selected volume. Step 3: Highlight the volume you want to use by using your mouse or track pad, or left and right arrow keys on the keyboard. Startup Manager will scan and list connected drives and volumes that can be booted from, as shown below. Release the key after Startup Manager appears. Step 2: Press and hold the Option (⌥) key immediately upon hearing the startup chime. Step 1: Turn on your Mac by pressing the power button by choosing Restart in the Apple menu, or restart it if it’s already on.
If your USB thumb drive, USB-based external disk or flash storage contains a usable operating system or an OS X installer, you can select it at boot time using OS X’S built-in feature called Startup Manager, which can be invoked via a simple keystroke.
How to create bootable external hard drive for imac 2009 how to#
How to start up your Mac from an external USB storage device
0 kommentar(er)
